Gomexus Now Offering Titanium Pliers at a Reasonable Price

Leprechaun

Leprechaun

Kind of a Big Deal - In My Mind Anyway
Staff member
Of course everyone has their own view of just what "affordable" means. But in the world of titanium pliers, $300-$500 is the norm. And so, for $159 (with free shipping) these can be considered a good buy. Check out the titanium pliers offers by others, like Visser or VS (I think they both still offer them, anyways) - and the premium prices they charge.

As far as Gomexus as a fishing gear supplier - every one of my reels carries either one of their carbon fiber or CNC-cut aluminum handles along with their custom knobs, and they have all proven to be as good as or better than anything available from Shimano or Daiwa's (SLP) catalog. Definitely my favorite aftermarket component provider. Zero failures in at least 6 seasons of use. Also, they provided very prompt and effective "same-day answer" customer service in the single instance of a mis-ship - which I think was my fault to begin with.

Here's their titanium pliers:

picgomexustools10.jpg


If this price is a bit much for the average dude, they also offer a superior pair of very cool skeletonized stainless steel pliers for a more budget-friendly $59.

Here's their website:

gomexus.com

Home Main

NEW ARRIVALS Quick view Add to wishlist 加入购物车 Gomexus Boat Steering Wheel Carbon Fiber 13.5″ Skiff Wheel No reviews $599.95
gomexus.com gomexus.com

I've always purchased their wares thru AliExpress, but maybe the cost might be lower if you go direct to them via their website. I don't know because I've not yet compared costs. Anyway, here's the brand new pliers review on Tackle Tour:

Gomexus Cyberbait and Gomexus Plier X #gomexus #gomexuspliers #gomexuscyberbait

The anglers source for tackle news and reviews. 100% independent review site.
www.tackletour.com

So, what pliers do I use? Haah, glad you asked. For the past 5 seasons I've been using a $12 aluminum 6.5" pair that John @ Trophy Tackle sells, out of a display canister right on his counter. They've been good to me, but the machined teeth are now well worn and so it's probably time for me to make an upgrade. And Gomexus IS my favorite small manufacturer, so . . .
 
Leprechaun said:
For the past 5 seasons I've been using a $12 aluminum 6.5" pair
Click to expand...

For the past 10 seasons I've been using a $15, 10" steel pair from Cabelas, perfect for surgical lure removal from deep within a fish. They may get replaced this year as the handle rust is breaking through the rubber handle.

Can't stand to have pliers tethered to a line, and the physicist in me considers that everything tries to get to it's lowest form of potential energy, which loosely translates to items going overboard on a boat. Based on that even $159 for a pair of titanium pliers, which is reasonable for that market, is way over my price point for potential sacrificial offerings to Poseidon...;););)
 
I used to feel that way about a tethered pliers. But I've learned it's less expensive to use them that way, rather than donate 'em to the local hard bottom. Actually, now that I think about it, I feel that it's actually more convenient tethered, as I always know where it is, rather than searching around the cockpit and quizzing my crew as to where "they" last left it. Truthfully, it usually isn't the crew that misplaces them. :rolleyes:
 
I always have my pliers sheathed and tethered. My hand knows exactly where they are at all times. If I miss the sheath while returning them or for some reason they are not sheathed, they are tapping alongside my leg/boot and it's very noticeable. Also, I have a friend who never carries pliers and he is constantly grabbing mine from the sheath. With the tether, he has to hand them back or sheath them. A sheath is especially handy for me when releasing a bass. I don't like bringing them into the boat if it's not necessary. After thumbing their jaw with my right hand, my left hand knows exactly where the pliers are located to help remove a stubborn hook. Also, replaceable cutters are a must for moderate to expensive pliers.
 
Leprechaun said:
Of course everyone has their own view of just what "affordable" means. But in the world of titanium pliers, $300-$500 is the norm. And so, for $159 (with free shipping) these can be considered a good buy. Check out the titanium pliers offers by others, like Visser or VS (I think they both still offer them, anyways) - and the premium prices they charge.

As far as Gomexus as a fishing gear supplier - every one of my reels carries either one of their carbon fiber or CNC-cut aluminum handles along with their custom knobs, and they have all proven to be as good as or better than anything available from Shimano or Daiwa's (SLP) catalog. Definitely my favorite aftermarket component provider. Zero failures in at least 6 seasons of use. Also, they provided very prompt and effective "same-day answer" customer service in the single instance of a mis-ship - which I think was my fault to begin with.

Here's their titanium pliers:

View attachment 92124

If this price is a bit much for the average dude, they also offer a superior pair of very cool skeletonized stainless steel pliers for a more budget-friendly $59.

Here's their website:

gomexus.com

Home Main

NEW ARRIVALS Quick view Add to wishlist 加入购物车 Gomexus Boat Steering Wheel Carbon Fiber 13.5″ Skiff Wheel No reviews $599.95
gomexus.com gomexus.com

I've always purchased their wares thru AliExpress, but maybe the cost might be lower if you go direct to them via their website. I don't know because I've not yet compared costs. Anyway, here's the brand new pliers review on Tackle Tour:

Gomexus Cyberbait and Gomexus Plier X #gomexus #gomexuspliers #gomexuscyberbait

The anglers source for tackle news and reviews. 100% independent review site.
www.tackletour.com

So, what pliers do I use? Haah, glad you asked. For the past 5 seasons I've been using a $12 aluminum 6.5" pair that John @ Trophy Tackle sells, out of a display canister right on his counter. They've been good to me, but the machined teeth are now well worn and so it's probably time for me to make an upgrade. And Gomexus IS my favorite small manufacturer, so . . .
Click to expand...
I used a pair all of last season and I was very happy with them. I use them for everything and the cutters are still like new, cutting braid from 10-40 lb test and not fraying it. All clean cuts in both braid and mono. And I know mine came with extra replaceable cutters. Where I put them is another mystery. I want them tethered otherwise they will fall overboard. Also, I hate looking for where I left them on the console, the floor, in a bucket, etc. :rolleyes:

Sometimes I get a little sloppy! :ROFLMAO:
 
Roccus7 said:
Yes knowing where your pliers are is critical. Mine are always in the most aft of the two starboard side gunwale pole holders, right alongside my "spot"...
Click to expand...
Another critical consideration is the design of the sheath. I have lost more than one set of pliers using the poorly conceived sheaths that have a metal clip on design.

You definitely want the type that has a full belt loop to avoid any unnecessary overboard donations!
 
I hear you! I’ve had the same struggle with the tether getting in the way and never finding a comfortable spot on my belt. I usually start the day with them clipped on, but by midday, I’m already setting them down somewhere, and by the end of the day, it’s a scavenger hunt to find where I left them.
 
I use a coiled tethered. I don't like the retractable tethers for a few reasons. For me, the coil works better with my long arms and I don't run out of tether. My coiled tether can always be stretched out those extra few inches. I also have the Boomerang SNIP attached to my sheath for up close knot tying. It's small and stays out of the way but I find it easier to trim knots than my pliers. When they dull or stop retracting, I toss them. Although I did take a set apart to fix a sticky recoil. It fairly was easy.

I totally agree with Capt. Mike, I don't like the clip on sheaths. I like it to stay attached to my belt with a loop.
 
Crabman said:
I don't like the clip on sheaths. I like it to stay attached to my belt with a loop.
Click to expand...
Agree. And further I like a sheath that has a velcroed tab that completely captures the pliers and holds them securely in the sheath. The one I've used for at least 10 seasons and like very much:

s-l1600.jpg


Note that it has a doubled pair of pockets, which are intended to hold not only your pliers, but a small pair of safety scissors (I guess) as well. I don't really use that second pocket any more, but in the past have tried a pair of the tiny Calcutta scissors in it, and also a pair of the cheapie Fiskar kiddie scissors, the ones with the rounded tips. Both rust fairly quickly, so that experiment was a fail for me.

But I'm all about solutions and so:
Crabman said:
I also have the Boomerang SNIP attached to my sheath for up close knot tying.
Click to expand...
I also use this little ditty as well. For those that don't know what this is, see below. Its the t*ts for snipping braid, and is why I no longer carry the scissors referenced above. Or really care if my pliers cutting blades go dull. Clips right to a belt loop and has a long spring-loaded braid tether. I particularly like that the blades are retractable. No more thigh-stabbing when dropping into my helm seat.
s-l1600.jpg
 
Same here. I wish the Boomerang lasted longer but I do get a number of years and they are my go to tool for tying knots. I find they don't dull as much as they stop retracting or won't open or close. You can fix that but opening them up. However, it's like fixing a recoil on your old lawn mower. I find they are not meant to cut very heavy material but will in a pinch. That's when my pliers chime in. As for my sheath, I personally am not into a velcro strap to hold them in the sheath. I want them as soon as I reach for them and it's usually while I'm bending over the side to release a fish. I never had my pliers come out of their sheath. It's a leather sheath and I oil it probably twice a year. I think this is very important and it looks great. The sheath is like your best fitting baseball glove when oiled. The pliers almost lock as they slip into place.
 
Last edited:
I bought this pair from Trophy about 2 or 3 seasons ago. No issues with it. The only thing I don't like is the sheath. It does a full 360 so there's times I go to reach for them and they are pointed towards the deck. I do like the one you posted Pete, with the double pocket. Seems like my little scissors I use for bread would fit nicely in there.

20250228_172410.jpg
20250228_172414.jpg
20250228_172518.jpg
 
📱 Fish Smarter with the NYAngler App!
Launch Now

Members online

Total: 303 (members: 12, guests: 291)

Fishing Reports

Latest posts

Latest articles

Back
Top