Time too ride

[Chinacat]

This would make mowing the lawn a lot more fun

 

[Rick67]

I tried those low temp solder/heat shrink butt connectors and they actually work (bought from Puerto Rico). Wonder how long they’ll last? I practiced with a few. Couldn’t get them apart once heated and half the width as regular butt connectors with heat shrink.

 

[cany]

I tried those low temp solder/heat shrink butt connectors and they actually work (bought from Puerto Rico). Wonder how long they’ll last? I practiced with a few. Couldn’t get them apart once heated and half the width as regular butt connectors with heat shrink.

They work good I use them here just gotta be carefull not to melt them lol

 

[Rick67]

They work good I use them here just gotta be carefull not to melt them lol

I used a heat gun just to see if it wouldn’t melt the plastic into goo as I’m bad with those crack lighting butane torches. I mean the solder didn’t disappear like with real heat but was not coming apart. If they stay water proof I’m happy. Wasn’t sure if those Chinese things got much play yet.

 

[cany]

I used a heat gun just to see if it wouldn’t melt the plastic into goo as I’m bad with those crack lighting butane torches. I mean the solder didn’t disappear like with real heat but was not coming apart. If they stay water proof I’m happy. Wasn’t sure if those Chinese things got much play yet.

Been using them for yrs most of the time I solder/shrink wrap but those things are way faster Im assuming you used them for the bar swap?

 

[Rick67]

Been using them for yrs most of the time I solder/shrink wrap but those things are way faster Im assuming you used them for the bar swap?

Yeah, I never even seen them before this year.
Sunday was like the pinnacle of the year so far. I drilled a head off a frozen bolt on the clutch handle assembly (no body ever uses never-seize). Using penetrant and heat was able to get the rest out. Next thing is to figure out the tank lights. None work. The last to crap out was “N” Like to get them all back up so I don’t reach down to the petcock when it sputters to find out I already have it in reserve position. Think I’ll look at them this am. I know they have bulbs. No gas line work in rain has me off.

 

[cany]

Yeah, I never even seen them before this year.
Sunday was like the pinnacle of the year so far. I drilled a head off a frozen bolt on the clutch handle assembly (no body ever uses never-seize). Using penetrant and heat was able to get the rest out. Next thing is to figure out the tank lights. None work. The last to crap out was “N” Like to get them all back up so I don’t reach down to the petcock when it sputters to find out I already have it in reserve position. Think I’ll look at them this am. I know they have bulbs. No gas line work in rain has me off.

Bulbs could be the culprit

 

[Rick67]

Bulbs could be the culprit

Check this sight out. They have every diagram like looking at Chiltons to find part. All bulbs were missing (pathetic) except the Neutral light. Put that light in turn position and worked. Tested the wire at bulb end, nothing. Then proceeded to get po’d. Can’t find the switch to test it. I was online looking for anything to show its location, all different. You’d think a wire going to tranny would be easy to spot. That sight is like repair manual schematic.

Going to Suffolk for bulbs, might as well get the switch anyways for what it’s worth.

Ronnie''s Harley-Davidson''s 1999 Harley Davidson

Ronnie's Harley-Davidson® offers service and parts, and proudly serves the areas of New Ashford, Windsor, Lenox and New Lebanon.

partsfinder.onlinemicrofiche.com

 

[cany]

Check this sight out. They have every diagram like looking at Chiltons to find part. All bulbs were missing (pathetic) except the Neutral light. Put that light in turn position and worked. Tested the wire at bulb end, nothing. Then proceeded to get po’d. Can’t find the switch to test it. I was online looking for anything to show its location, all different. You’d think a wire going to tranny would be easy to spot. That sight is like repair manual schematic.
View attachment 78132Going to Suffolk for bulbs, might as well get the switch anyways for what it’s worth.

Ronnie''s Harley-Davidson''s 1999 Harley Davidson

Ronnie's Harley-Davidson® offers service and parts, and proudly serves the areas of New Ashford, Windsor, Lenox and New Lebanon.

partsfinder.onlinemicrofiche.com

Cool site Me and my buddy almost had to take a 3hr ride there last year when I broke down in lake george

 

[Rick67]

Cool site Me and chevy almost had to take a 3hr ride there last year when I broke down in lake george

Almost?
Albany shit a part or did you Jerry-rig it?

 

[cany]

Almost?
Albany shit a part or did you Jerry-rig it?

We wound up getting it in Troy (Brunswick Harley but if they didnt have it off to ronnies we were going

 

[cany]

 

[Roccus7]

View attachment 78150

The sad part is that sales are down, but the Electric Part of HD's sales are up, so they can park their bike next to their Tesla.

Do the electric Harley's have a big azz speaker for sound??

 

[cany]

The sad part is that sales are down, but the Electric Part of HD's sales are up, so they can park their bike next to their Tesla.

Do the electric Harley's have a big azz speaker for sound??

I have never seen one or heard one

 

[Rick67]

View attachment 78150

Where price at? How does anyone justify $20-40,000 for a bike. I would have walked out with the black road king on the way to parts on the left yesterday if it wasn’t the cost of a VW Jetta. Half Chinese crap should be cheaper anyways.

 

[cany]

Where price at? How does anyone justify $20-40,000 for a bike. I would have walked out with the black road king on the way to parts on the left yesterday if it wasn’t the cost of a VW Jetta. Half Chinese crap should be cheaper anyways.

Agreed the prices are outta control

 

[Rick67]

Monday is looking warm.

 

[Rick67]

Monday is looking warm.

And I got called in at 6:30, bitches! Was even going to tare ass past Canny a few times to piss him off.

 

[cany]

tomorrow gonna be warm too

 

[dsedy]